Car audio

Car audio, done clean

Screens, speakers, amps and subs, installed neat, tested and guaranteed. No cut factory wires, no rat's nest behind the dash.

Call Us Now Send us a message

How we install

Installed like it's going in our own car

A good system should sound great and look like it came that way. Every install gets the same care: wiring that is bundled, strapped and wrapped, connections that are protected, and parts that sit where the factory would have put them.

Wiring runs are bundled, wrapped and tied down
Amps mounted securely, often on a bracket or plate made for the vehicle
Plug and play radio installs
Custom-made brackets, baffles and mounts when the part you need doesn't exist

Call for a quote

Compact amplifier mounted on a vehicle-specific plate

Door speaker installed over sound deadening

Kenwood floating CarPlay screen in a dash

iDatalink Maestro interface module installed in a Subaru with its plug-in harnesses

Plug and play

No cutting. No splicing.

When there's an iDatalink Maestro kit for your vehicle, that's what we use. A vehicle-specific harness plugs into the factory connectors, so we never cut or splice your factory wires. The install is cleaner, it's reversible, and your vehicle's wiring stays the way the factory built it.

Radio replacement

Maestro lets a new screen work with the vehicle, so features like steering wheel controls and the backup camera can keep working. What carries over depends on the vehicle and the radio.

OEM integration

Got a factory amp or premium system? Maestro modules let us add aftermarket amps and processors while keeping the factory radio and its features, so the dash stays untouched.

Plug-in harnesses, with no cut or spliced factory wires
Programmed for your exact vehicle before it goes in
Keeps factory features working where the vehicle allows

Maestro coverage varies by vehicle. Call us and we'll tell you what fits yours.

What we do

Everything for your sound system

From a simple screen swap to a full system with amps, speakers and subs.

Screens & Receivers

Apple CarPlay and Android Auto receivers from brands like Sony, Kenwood and JVC, from standard sizes to big floating screens.

Speakers & Tweeters

Component and coaxial speakers fitted properly, with tweeters aimed and mounted cleanly.

Amplifiers

Clean power for your speakers and subs, mounted securely with fused, protected wiring.

Subwoofers

Under-seat, enclosure or built into the vehicle, for the low end the factory system leaves out.

Sound Deadening

Less rattle and road noise, and tighter bass, by treating doors and panels.

Factory Integration

Keep the features you use, like steering wheel controls and the backup camera, with plug-and-play Maestro kits.

Large floating CarPlay screen installed in a Lexus

Sony CarPlay receiver in a Ford Ranger dash

Sony CarPlay receiver in a custom dash kit

Sony CarPlay receiver in a custom RV dash panel

CarPlay and Android Auto receiver in a dash

Tweeter mounted in a dash speaker location — Tweeter fitted in the factory dash location

Lit subwoofer enclosure built into a tailgate — Subwoofer enclosure built into a tailgate

Two speakers fitted into their mounting brackets — Speakers fitted to their mounting brackets

Kenwood amplifier mounted under the carpet line — Kenwood amplifier, wires routed and wrapped

Kenwood amplifier with neat color-matched wiring — Every wire routed and tied down

Backup cameras

See what's behind you

Add an aftermarket backup camera to a vehicle that never had one, or replace one that stopped working. It comes up on your screen when you shift into reverse.

On your screen

The camera shows on your CarPlay or Android Auto screen as soon as you put it in reverse.

Clean, hidden wiring

The cable is routed through the vehicle and tucked away, with nothing hanging or rattling.

Mounted for a clear view

Placed where it gives you a straight, centered picture, at the license plate, tailgate or bumper.

Custom fabrication

When the part doesn't exist, we make it

Not every vehicle has a bracket, bezel or baffle you can buy. We make custom parts in-house with a 3D printer and a CNC router, so your install fits and looks right.

3D printing

Bambu Lab P2S

An enclosed, high-speed 3D printer that turns a design into a finished plastic part. Because it's enclosed, we can print strong, heat-tolerant materials that hold up inside a vehicle.

256 × 256 × 256 mm build volumeFully enclosedMulti-color with AMS 2 Pro

What it lets us do

Speaker adapter rings, baffles and tweeter pods
Mounting brackets, trim pieces and custom bezels
Replacement clips and one-off parts that are no longer sold
Test fits in plastic before we cut the final part

CNC router

X-Carve 1000mm CNC

A computer-controlled router that cuts parts from flat sheet and block with repeatable precision. A part cut on the CNC comes out the same every time, with the straight edges and exact holes a hand-cut one can't match.

29.5 × 29.5 in cutting areaWood, plastic & soft metalsCNC-cut accuracy